Heavy duty truck and trailer parts and accessories including brakes, suspension, hardware, wiring, tries, wheels, fifth wheels, parts and much more.
This Demco Brake Away Cable and Lever fits Demco model DA91, DA10 and DA20 actuators. Gasket, cable, lever, safety hook, and base included.
This Zinc Hook and Keeper Door Holder works well with doors and windows. The mounting holes are 2-5/16" x 1" square, and it is Zinc plated for corrosion resistance.
This Demco Master Cylinder is a replacement Demco Master Cylinder fits all Demco models. For drum brakes only.
This Left Hand Cab Lock with Thumb Latch is designed to be mounted on the inside of the door. This simple surface mount latch is easy to install and use.
This Right Hand Cab Lock With Thumb Latch has a high carbon tempered steel spring for extended smooth operation, for the right hand side.
This Wallace Forge 5/8" x 6" Hitch Pin With Keeper has a long list of uses, but the most common is to secure ball mounts.
This Wallace Forge 5/8" x 4-1/2" Hitch Pin with Keeper has a long list of uses, but are most commonly used to secure ball mounts.
This 5/8" Locknut is a 5/8"-11 Hex locknut, grade 5 for use with 5/8"-11 bolts. priced and sold per each with quantity pricing available.
This 5/8" Lockwasher is made for for 5/8" diameter bolts. This stainless steel 5/8" Lockwasher is sold per each washer with quantity pricing available.
This Right Hand Cab Lock without Thumb Latch has a high carbon tempered steel spring for extended smooth operation.
This Black 1/4" ID Wire Frame Clip keeps your wires tight and out of harms way. These clips are sold per each.
This 5/8"-18 Coned Wheel Nut has a 1-1/16" OD and is 90° Coned. Not for use with flat faced wheels unless a wheel retaining ring is used.
This 1"-8 Locknut is recommended for use with 7-169 10K-15K spring eye bolt, 7-182 9K center equalizer bolt and 7-136-2 10GD center equalizer bolt.
This 3/4" -10 Locknut is recommended for the 7-135-2 10K GD Spring Eye Bolt and 11-70LN U-Bolt and is priced per each.
This 7/16" nut fits Brake Mounting Bolts and 7/16" Diameter U-Bolts and more. priced and sold per nut with quantity pricing available.
This Dexter 1"-14 Castle Style Spindle Nut is a 1"-14 Dexter castle nut with the new style 12 castellation.
This Dexter Spindle Nut Retainer for New EZ-Lube Jam Nut acts as a lockwasher for the jam nut on EZ-Lube style axles.
This Dexter Jam Nut for 2-8K Axles w 1"-14 Zerk Lube Spindles is used on 2002 to new EZ-Lube axles with a 1"-14 spindle.
This 5/8"-11 Locknut is recommended for use with Spring-Retainer Bolt And U-Bolts, 11 Threads per inch, sold per each.
This Dexter 1-1/2" Fine Thread Spindle Nut is a 1-1/2"-12 fine thread spindle nut for 9-10K general duty axles and has a 2-1/4" OD.
This Hopkins 6 Pole Round Trailer End, die-cast, 6 pole round connector, will securely connect your vehicle wiring to your trailer.
This Hopkins 6-Pole Round Connector Vehicle End s made of die-cast zinc that is impact and corrosion resistant.
This Laclede Chain .351K 3/16" Zinc S-Hook is great for lightweight applications and has a 351 pound capacity, sold per each s hook.
This Dexter Snap Ring For 50MM Nev-R-Lube Bearings is a Dexter Snap Ring For 50MM Nev-R-Lube Bearings.
This Dexter Snap Ring for 42MM Nev-R-Lube Bearings is a Dexter Snap Ring For 42MM Nev-R-Lube Bearings.
This Drive-in Stud 5/8" x 3.125" is a 5/8"-18 x 3-1/8" replacement drive-in stud, sold per each drive-in stud.
This Drive-in Stud 9/16" x 2-5/16" is a 9/16"-18 x 2-3/4" replacement drive-in stud, sold per each drive-in stud.
This 3/4" 10K GD Carriage Bolt with Zerk is recommended for Locknut Part # 6-113, 10 Threads Per Inch, Grade 5 Bolt.
This Dexter Drive-in Stud 1/2" x 2.24" Zinc is a 1/2"-20 x 2.24" replacement drive-in stud., sold per each drive-in stud.
This 5/8" Spring Eye Bolt for 9K Springs is recommended for use with Locknut Part # 6-38, has 11 Threads Per Inch, Grade 5 Bolt.
This 10K HD-15K Drum Mounting Bolt is used to mount hub to the drum on 10k HD-15k Dexter axles and is sold per each mounting bolt.
This 7/8" 10K GD Spring Eye Bolt is a 7/8"-9 10K General Duty Axle Spring Eye Grade 2 Bolt with 9 Threads Per Inch.
This Dexter Drive-in Stud 1/2" x 2.70" is a 1/2"-20 x 2.70" replacement drive-in stud, sold per each drive-in stud.
This Dexter 3/4"-10 x 4-1/2" 10K GD Spring Eye Bolt is recommended for Dexter 10K general duty springs with rubber bushings.
This Koolatron Power Cord Kit Replacement is for all new coolers and most older models. It includes a 10' Cord and a Pigtail Cord.
This Bulldog Replacement Pin for 190 Series Drop Leg jacks measures 9/16" x 2.75" and is priced and sold per each pin.
This Dexter Custom Brake Adjuster Tool is used to adjust star-adjuster type brakes quickly and easily, drop-forged steel.
These Redline 7/16" x 3-1/8" x 4" Square Zinc U-bolts, Nuts and Washers can be used to attach a square tube axle to the trailer frame.
This 7/16"-14 Zinc Plated Locknut with Nylon Insert has 14 Threads Per Inch and is Corrosion Resistant, priced and sold per each locknut.
This 7/16" Zinc Plated Flat Washer is made from durable long lasting zinc plated steel and is priced & sold per washer with quantity pricing available upon request.
This 4.5K Slipper Spring mounts to trailer frame with hangers or a hanger kit and reduces wear and tear on the trailer.
This 5K Slipper Spring 72-21 flexes to absorb road shock and provide a smooth ride, also reduces wear and tear on trailer.
This 2000lb Double Eye Spring mounts to the trailer frame with hangers or a hanger kit and ensures a level ride on bumpy surfaces.
This 11,200lb Slipper Spring for Hutch Suspensions ensures a level ride on bumpy and uneven surfaces, mounts to the trailer frame.
This 3/4" ID 7/8" OD Nylon Equalizer Bushing measures 3/4" Inside diameter, 7/8" Outside diameter and 1-3/4" long.
This Nylon Spring Eye Bushing outer diameter is 7/8", inner diameter is 1/2" and length is 1-3/4", sold per each bushing.
This Nylon Spring Eye Bushing outer diameter is 7/8", inner diameter is 9/16" and length 1-3/4", priced and sold per each.
This 5/16" Zinc Chain Quick Link Laclede Chain has a 6.16K weight load capacity, it measures 5/16" Diameter and is made for standard 5/16" chain.
This Excalibur 3.355" OD Drive-in Grease Cap fits #99 spindles and 50mm Dexter Nev-R-Lube hubs, 3.355" OD Drive-in.
This Locking T Style Door Handle, 3-1/2" Long Shaft is recommended for use with the 57 and 58 series cab locks.
This 7/8" Equalizer Bolt is designed for 3.5k-8k Tandem and Triple Axle Hanger Kits. It uses Castle Nut Part # 78CN which is sold separately.
This 7/8" Castle Nut can be used in tandem and triple axle hanger kits. It has a 7/8" Inside Diameter and 9 Threads Per Inch.
This Dexter 5-Spoke UTG 12" Hub and Drum for 6-7K Axles is designed for use with a #42 spindle, Hub & drum capacity 3,500lbs.
This Dexter 5-Spoke UTG 12" Standard Hub and Drum Kit for 6-7K Axles is designed for use with a #42 spindle, capacity of 3,500lbs.
This Dexter 5-Spoke UTG 12" EZ-Lube Hub and Drum Kit for 6-7K Axles is designed for use with a #42 spindle, capacity of 3,500lbs.
This Dexter 6 on 5.5" Hub and Drum Only for 5.2K Dexter Axles s designed for a #42 spindle. Each hub, drum has capacity of 2,600 lbs.
This Dexter 6 on 5.5" Hub and Drum Kit for 5.2K Axles no need to worry about the races as they are already pressed in.
This Dexter 6 on 5.5" EZ-Lube Hub and Drum Kit for 5.2K Axles come with some main components like the inner & outer bearings.
This Dexter 6 on 5.5" Hub Only for 5.2K Axles races as they are already pressed into the hub for you, 6 on 5.5" bolt pattern.
This Dexter 6 on 5.5" EZ-Lube Hub Kit for 5.2K Axles is designed for use with a #42 spindle. Each hub has a capacity of 2,600lbs.