Hydrastar Electric Over Hyd Actuator Drum

This is an electric hydraulic brake actuator that allows you to use an electric brake controller from inside of your vehicle in order to adjust & control the trailer's hydraulic brakes. Experience convenience as you achieve greater braking control and performance.

• Responds to commands from in-cab electric brake controller (which is sold separately) to apply the trailer brakes.
• Activates the trailer brakes when you apply the brakes in the tow vehicle.
• Gives you greater control over the trailer's brakes with a faster response time.
• Proportional braking for smooth and effective stops.
• Quick adjustment when you change trailers or loads.
• Overcomes problems that are associated with standard surge brake actuators.
• No interference when you back up, even uphill. No more getting out of your vehicle to lock out the brakes.
• No brake drag or pushing sensation, which can occur with surge brakes when you drive downhill.
• Allows the use of the manual override feature that is included with most electric brake controllers, so that you can engage the trailer brakes without having to apply your vehicle brakes.
• Constructed of extruded aluminum to resist corrosion.
• Includes built-in bleeder which allows you to easily flush air out of your brakes.
• Compatible with any standard breakaway kit.
• Installs on the trailer, connecting into the trailer's wiring and hydraulic brake lines.
• Made in the USA.

Specs:
• Application: single or tandem axle trailers with drum brakes.
• Maximum output pressure: 1,000 psi. Check with the trailer brake manufacturer for pressure specifications.
• Vehicle requires an in-cab electric brake controller, which is sold separately.
• 7-Way, blade-style trailer connector mounted near the bumper.
• Dimensions: 11-3/4" long x 3" wide x 7-3/8" tall.
• 2-Year limited warranty.